02-05-2013 03:58 AM - edited 03-07-2019 11:30 AM
Hello,
Could you help me, according to cisco manual in order to change SDM template i need to reboot switch, but when i have C3750-X stack do i need to reboot stack or maybe will be enough reboot in sequence the stack members?
Thanks in advance
02-06-2013 08:49 AM
you should only have to update the master, as it controls the config on the other switches.
Dan
02-06-2013 11:01 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Issuing the reload command should do the trick, i.e. it will reload all the stack members.
Reloading individual stack members should have them restart in context of the currently running configuration, which you don't want.
02-06-2013 01:03 PM
Thank you, I thought that I should restart all stack but I had hoped
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide