Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
i have just installed the AnyConnect Mobile license over demo SecPlus license and performed the reboot(soft reboot with reload command).
And now i still have 39 days for AnyConnect Mobile License... when it shoud be perpetual.
That is the...
Hello,Help me pls, I'm trying configuring CUPC in the Deskphone mode but with no success. The Softmode is ok (no errors). CUPC - Server status and notifications:CUCM IP Address - 172.16.x.xPort - 2748Protocol - QBEStatus - connecting (it remains on c...
Hello, Something strange with nat command the following nat command excellent works on ASA 8.4(2) but fails on ASA 8.4(4):nat (dmz,any) source static dmz_srv pub_srvI perform clear xlate, shutdown interface dmz but with no success. p.s. i have cha...
Hello,Could you help me, according to cisco manual in order to change SDM template i need to reboot switch, but when i have C3750-X stack do i need to reboot stack or maybe will be enough reboot in sequence the stack members?Thanks in advance
for info:
The name field in ip gateway definition in MS Exchange 2016 must contains the ip address of the CUCM. Otherwise, an error -
ms-diagnostics-public: 15602;source="EXCH-01.test.com";reason="The Unified Messaging server is not authorized to ac...
No, I dont perform debug, I just want to disable the feature if it possible. I need the radio interface will be restarted if it needed.interface d0 - 2,4GHz - station-role repeaterlog:%DOT11-2-RESET_RADIO: Restarting Radio interface Dot11Radio0 d...
I have lab with the same config but on ASA 8.4(2) and in this lab everything is ok, but in production when i changed nat(dmz,outside) to nat(dmz,any) i cant access the dmz host by public ip from inside interface, at the same time in lab it works.I h...
