Changing DCNM(eth0 & eth1) IP address after the installation

[Cheen Yaw Loh]

How can i change the ip address for eth0 and eth1 of the DCNM server after the installation is completed?

For example, during the installation, i set the eth0 to 192.168.0.2. after that, i want to set 192.168.1.2 to the eth0. how can i do?

it seems like i can't change the ip address by ameding /etc/sysconfig/network-scripts/ifcfg-eth0. The DCNM will not be working after reboot.

Best regards,

Roger

[Reza Sharifi]

Have a look at this link:

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/10_0_x/fundamentals/DCNM_Fundamentals_10/fms.html#93031

HTH