02-18-2023 12:36 PM
There are different devices attached to the switches, and these devices operate at different speeds. I want to use storm control command if internet speed is 100mbit and above
can i do this with classmap or any other way?
Solved! Go to Solution.
02-20-2023 06:13 AM
we are not sure what is the use case here
02-19-2023 01:20 AM
we are not sure what is the use case here - But technically possible depending on the model of the switch and the IOS code running.
02-19-2023 12:26 PM
hello @balaji.bandi switch model WS-C3560CX-12PC-S , version 15.2(7)E5 and image C3560CX-UNIVERSALK9-M
thank you.
02-20-2023 06:13 AM
we are not sure what is the use case here
02-19-2023 12:39 PM
what is relate of storm control with internet speed ?
you need storm control in any internet speed.
or there is something else if you can share it with us.
02-20-2023 05:09 AM
hello,
necessary to minimize the problems that may arise from the bandwidth in a restricted network infrastructure.
02-20-2023 09:59 AM - edited 02-20-2023 10:01 AM
I see one case that it fit to your requirement
the ISP router need SW with storm control.
https://www.smitasin.com/docs/unknown-unicast-flooding.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide