cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1494
Views
0
Helpful
0
Replies
Highlighted
Beginner

Cisco 1941/K9 VPN router MPLS IPVPN point-to-point

I have 2 cisco 1941/K9 vpn router. i have configured both with LAN ip address given by our vpn provider which is 172.10.10.1 and the other is 172.10.20.1.

Both IP addresses are configured to GigabitEthernet port 0/0 on both routers.

1. Is it possible to configure our own set of ip address like 10.71.10.1 and 10.71.50.1 on the GE 0/0 port?

2. Or can we configure our own set of ip addresses (10.71.10.1 and 10.71.50.1) to GigabitEthernet port 0/1 and maintain the other ip addresses on port 0/0?

The first purpose is to have our own set of ip addresses for LAN connection and I will be able to connect or telnet whichever ip address or port is up.

Please guide, thank u.

0 REPLIES 0
Content for Community-Ad