Cisco 24 port SFP switch with 10g Uplink

[rizwankkl]

Hi,

Can anyone please suggest a new Cisco L3 switch with 24 sfp ports and 4 x 10g uplink interface. 

I am unsure whether the below part numbers are what I am looking for. please help.

C9300X-24HX

24 Cisco UPOE+, 24x 10G Multigigabit

100M, 1G, 2.5G, 5G, or 10 Gbps

&10 Gig  module for uplink

C9300-24UXB

24 Multigigabit Cisco UPOE (100M/1G/2.5G/5G/10Gbps)

[Kasun Bandara]

switches mentioned by you are ALL multigigabit Copper ports. those are not SFP. for full SFP 24 ports use C9300-24S with C9300-NM-8X (8x 10G SFP) or C9300-NM-4M (4 x multigigabit 10G copper) uplink module

[rizwankkl]

THanks, but C9300-24S supports only 1gig but I am looking for all 10gig backplane

[Leo Laohoo]

---

@rizwankkl wrote:

THanks, but C9300-24S supports only 1gig but I am looking for all 10gig backplane

---

What "10gig backplane"?

9300 has a 480 Gbps backplane. 

9300X has a 1.0 Tbps backplane.  

[rizwankkl]

Any other preferred model would you suggest? instead 9300 series..

9400's are quiet expensive..

[Leo Laohoo]

24-port SFP+ capable switch, the cheapest is the 9300X-24Y.  

Uplink module would be C9300X-NM-8Y.

[Leo Laohoo]

---

@rizwankkl wrote:

Can anyone please suggest a new Cisco L3 switch with 24 sfp ports

---

What speed of optics, 1- or 10 Gbps?

[rizwankkl]

10 gig

[balaji.bandi]

C9300X-24HX    support all SFP port - make sure you mentioned Ethernet or Fibre ports

All NM Module support, but if you looking all 10GB port i would expect uplink should be 40 or 100GB to best outcome.

Table 3.        Network module numbers and descriptions

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9300-series-switches/nb-06-cat9300-ser-data-sheet-cte-en.html

[rizwankkl]

Thanks, I hope C9300-24-HX supports our requirement.. 

we will use 24 x 10 gig fiber sfp and 10g for uplink.

[balaji.bandi]

we will use 24 x 10 gig fiber sfp and 10g for uplink.

yes that is the requirement, as i suggested you may see uplink may have bottleneck when you fully populated 10GB ports.