05-07-2016 01:55 AM - edited 03-08-2019 05:39 AM
Hi all,
i am getting bellow error after reloading the cisco2800 pagent router
rommon 1 > PC = 0xbfcd0908, Cause = 0x2000, Status Reg = 0x3040a803
PC = 0xbfcd0908, Cause = 0x2000, Status Reg = 0x3040a803
PC = 0xbfcd0d54, Cause = 0x2000, Status Reg = 0x3040a803
05-07-2016 02:20 AM
Connect the console cable and reboot. Post the entire boot-up process. I want to see where it fails.
05-07-2016 02:25 AM
Getting this error
WARNING: Break key entered while upgrade ROMMON was initializing.
Do you want to fall back to readonly ROMMON? (y/n) [n] PC = 0xbfcd0d54, Cause = 0x2000, Status Reg = 0x3040a803
05-07-2016 02:26 AM
In ROMmon, enter the command "reset" and hit enter. The router should reboot.
05-07-2016 02:28 AM
Tried but no luck
05-07-2016 02:35 AM
Are there any WIC/NM installed? If yes, remove them all and reboot again.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: