Cisco 2800 Pagent recovery

[manojk6]

Hi all,

i am getting bellow error after reloading the cisco2800 pagent router

rommon 1 > PC = 0xbfcd0908, Cause = 0x2000, Status Reg = 0x3040a803
PC = 0xbfcd0908, Cause = 0x2000, Status Reg = 0x3040a803
PC = 0xbfcd0d54, Cause = 0x2000, Status Reg = 0x3040a803

[Leo Laohoo]

Connect the console cable and reboot.  Post the entire boot-up process.  I want to see where it fails.

[manojk6]

Getting this error

WARNING: Break key entered while upgrade ROMMON  was initializing.
Do you want to fall back to readonly ROMMON? (y/n) [n] PC = 0xbfcd0d54, Cause = 0x2000, Status Reg = 0x3040a803

[Leo Laohoo]

In ROMmon, enter the command "reset" and hit enter.  The router should reboot.

[manojk6]

Tried but no luck

[Leo Laohoo]

Are there any WIC/NM installed?  If yes, remove them all and reboot again.