11-21-2015 08:52 PM - edited 03-08-2019 02:47 AM
FNG - I've got one port that's supposed to be set to auto auto, and the led is flashing green very rapidly. So I'm guessing it's setup right. And, I've got one port toggling between green and amber. This port is supposed to be set at 100Mbs and full duplex. Does this indicate a problem? Or does it indicate the port is set to 100Mbs? I've only got the two ports in use.
Solved! Go to Solution.
11-21-2015 09:18 PM
Hi,
Hope that help..
Please rate if its helpfull
Regards
11-21-2015 09:14 PM
Hello,
It means you have error in the link. What is connected to that port? Try to replace its cable.
Masoud
11-22-2015 09:51 AM
Thanks for the info.
11-21-2015 09:18 PM
Hi,
Hope that help..
Please rate if its helpfull
Regards
11-05-2018 07:00 AM
Hello, I am in a different problem,i.e Indicator light of my cisco L2 switch is showing Green light alternately (there is a one second gape between each blink), And internet also not available. Please give a solution to solve this problem
11-22-2015 09:51 AM
Thanks for the information. Just what I needed.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide