cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
479
Views
0
Helpful
3
Replies

Cisco 2960-CX Managed L2/L3 Gigabit Ethernet (10/100/1000)

Rutikanga31
Level 1
Level 1

hello everyone,

i have switches Cisco 2960-CX Managed L2/L3 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) White have the problem of POE no working. can you assist me please.

thank you

 

1 Accepted Solution

Accepted Solutions

Leo Laohoo
Hall of Fame
Hall of Fame

Post the complete output to the following commands: 

  1. sh version
  2. sh post

View solution in original post

3 Replies 3

Leo Laohoo
Hall of Fame
Hall of Fame

Post the complete output to the following commands: 

  1. sh version
  2. sh post

Switch#show post
Stored system POST messages:

Switch 1
---------

POST: MA BIST : Begin
POST: MA BIST : End, Status Passed

POST: TCAM BIST : Begin
POST: TCAM BIST : End, Status Passed

POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed

POST: PortASIC Macsec Loopback Tests : Begin
POST: PortASIC Macsec Loopback Tests : End, Status Passed

Switch#
Switch#
Switch#
Switch#
Switch#sh version
Cisco IOS Software, C2960CX Software (C2960CX-UNIVERSALK9-M), Version 15.2(4)E6, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Thu 05-Apr-18 03:25 by prod_rel_team

ROM: Bootstrap program is C2960CX boot loader
BOOTLDR: C2960CX Boot Loader (C2960CX-HBOOT-M) Version 15.2(4r)E5, RELEASE SOFTW ARE (fc4)

Switch uptime is 1 hour, 3 minutes
System returned to ROM by power-on
System restarted at 11:42:26 UTC Wed Dec 28 2022
System image file is "flash:/c2960cx-universalk9-mz.152-4.E6/c2960cx-universalk9 -mz.152-4.E6.bin"
Last reload reason: Reload command

 

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C2960CX-8PC-L (APM86XXX) processor (revision L0) with 524288K bytes of memory.
Processor board ID FOC2244T4LN
Last reset from reload command
1 Virtual Ethernet interface
12 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 70:18:A7:05:84:00
Motherboard assembly number : 73-100862-04
Power supply part number : 341-0675-02
Motherboard serial number : FOC224300UP
Power supply serial number : LIT22413VK7
Model revision number : L0
Motherboard revision number : B0
Model number : WS-C2960CX-8PC-L
System serial number : FOC2244T4LN
Top Assembly Part Number : 68-100568-01
Top Assembly Revision Number : D0
Version ID : V03
CLEI Code Number : CMMT410BRB
Hardware Board Revision Number : 0x09


Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 12 WS-C2960CX-8PC-L 15.2(4)E6 C2960CX-UNIVERSALK9-M


Configuration register is 0xF

Switch#

Can you post the complete output to the command "sh power inline"?

Review Cisco Networking for a $25 gift card