12-30-2014 11:45 AM - edited 03-07-2019 10:02 PM
Has anyone used 2 cisco 3524-PWR-XL switches uplinked together to make 48 ports? Is it possible to uplink 2 fastethernet ports so the switches talk to each other. If it can be done does any know what the configuration should be I have used the following with no success.
interface FastEthernet0/24
description Uplink to DBSwitch2 Room 202
switchport trunk encapsulation dot1q
switchport trunk native vlan 235
switchport trunk allowed vlan 1,135,235,1002-1005
switchport mode trunk
switchport priority extend trust
Thanks for any help it is greatly appreciated.
Donovan
12-30-2014 12:31 PM
I think you might be looking to build an etherchannel between the two switches.
Please check this link: http://www.cisco.com/c/en/us/support/docs/switches/catalyst-2900-xl-series-switches/21041-131.html
12-30-2014 01:01 PM
Thanks I went through link and tried commands but it doesn't seem to work.
Donovan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide