ā01-05-2016 05:12 PM - edited ā03-08-2019 03:18 AM
Hello, we are needing to add one of our older switches temporarily to support new users. I was reading that switches with different major versions will be incompatible and get a version mismatch in stack mode. The 3650 is currently running IOS XE ver 3.6.3E and the 2650 is running IOS 12.2(55)SE8. Is it possible to stack these switches with stackwise cables? My immediate feeling is no but I was wondering if there was any other possibilities.
I have it trunked to one of the other switches in the meantime.
Thanks and best regards
Solved! Go to Solution.
ā01-05-2016 05:35 PM
You probably mean a 2950. Absolutely no way.
You can simply connect them together though (non stacked). You just need to configure the 2950 separately, since it wont stack.
ā01-05-2016 05:35 PM
You probably mean a 2950. Absolutely no way.
You can simply connect them together though (non stacked). You just need to configure the 2950 separately, since it wont stack.
ā01-05-2016 05:36 PM
Hi,
Yes you are correct. You cannot stack 3650 with 2650 in the same stack at this point of time.
Regards
Inayath
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide