10-09-2015 05:30 AM - edited 03-08-2019 02:08 AM
I am searching for Cisco supporting documents on what the process is to upgrade the IOS on a 3650 switch stack but cant find anything good so far.
Regards
ErmalG
Solved! Go to Solution.
10-09-2015 06:08 AM
hi,
see helpful link:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3650/software/release/3se/system_management/configuration_guide/b_sm_3se_3650_cg/b_sm_3se_3650_cg_chapter_010101.html#concept_1D681350B7414ABA95BA6FEFE2E450B0
10-09-2015 06:08 AM
hi,
see helpful link:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3650/software/release/3se/system_management/configuration_guide/b_sm_3se_3650_cg/b_sm_3se_3650_cg_chapter_010101.html#concept_1D681350B7414ABA95BA6FEFE2E450B0
10-09-2015 09:06 AM
Hello
This looks like what I was looking for.
Thank you
Ermal
10-09-2015 03:46 PM
hi,
thanks for the rating!
i also recently stacked a few 3650.
see helpful link:
http://wannabelab.blogspot.com/2015/10/stacking-cisco-catalyst-3650-switches.html
09-22-2020 01:22 AM
After i copy the image from TFTP to flash in the active switch because we can access only master
boot variable should be as below
boot system switch 1 flash:cat3k_caa-universalk9.SSA.03.12.02.EZP.150-12.02.EZP.150-12.02.EZP.bin
so in this the switch 1 , will it be a member ? and if 2 is my member should i change it to switch 2 ?
I saw somehwere in cisco document we shld give switch all...will that work
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide