07-07-2018 10:18 PM - edited 03-08-2019 03:36 PM
Hi, could you please help me to understand following,
can we use Cisco 3650 Switch (WS-C3650-24TD-S) as a Layer 3 device in addition with Layer 2, we need to configure following.
1. Inter-Vlan routng.
2. Static & Default routing.
Our Cisco Bill of Material are mentioned below.
Cisco Part Number Description
WS-C3650-24TD-S Cisco Catalyst 3650 24 Port Data 2x10G Uplink IP Base
CON-SNT-WSC365BU SNTC-8X5XNBD Cisco Catalyst 3650 24 Port Data 2x10G U
S3650UK9-163 UNIVERSAL
Solved! Go to Solution.
07-07-2018 11:00 PM
Hi,
The Switch "WS-C3650-24TD-S" is an IP base switch so basic L3 routing as static and dynamic (stub) routing is available by default.
For more feature you can visit at Datasheet:
Regards,
Deepak Kumar
07-07-2018 11:00 PM
Hi,
The Switch "WS-C3650-24TD-S" is an IP base switch so basic L3 routing as static and dynamic (stub) routing is available by default.
For more feature you can visit at Datasheet:
Regards,
Deepak Kumar
07-07-2018 11:03 PM
Thanks Deepak.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide