01-20-2015 03:32 AM - edited 03-07-2019 10:18 PM
Hey Guys,
can someone tell me if Cisco 3650 with IP base image supports RIP Version 2 or not?
01-20-2015 04:00 AM
Hi
From the datasheet: http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3650-series-switches/data_sheet_c78-729449.html
IP unicast routing protocols (static, Routing Information Protocol Version 1 [RIPv1], and RIPv2, RIPng, Enhanced Interior Gateway Routing Protocol [EIGRP] stub) are supported for small-network routing applications with the IP Base feature set.
Regards
Aaron
01-25-2015 07:35 PM
Hi Aaron,
thanks for reply. I guess for RIP version 2 we need IP services (Enhanced Multilayer Image). The IP base image or Standard Multilayer Image will not support RIP version2. What do you say?
01-25-2015 08:01 PM
For these switches the feature is not based on the IOS image, it is based on the license you have on the switch. As long as you have IP Base license, you can use RIP version 2.
try
"sh license right to use"on your switch.
HTH
02-02-2015 05:40 PM
Hi Reza,
this is great to know. So what you say is I don't have to buy the IP Services Enhanced Multilayer Image (EMI) if the requirement is only to run RIP V2. So my question is I only need to order License for RIP V2 with IP Base image when I am ordering the switch with Cisco?
02-02-2015 06:23 PM
Hi,
There is no such thing as EMI image anymore.
When you order a new 3560-X switch, you have 2 options
1-Order IP Base license. This will give you RIP V2
2-Order IP Services license. This will give you everything including OSPF, BGP, etc..
HTH
02-02-2015 07:44 PM
Thank you Reza for this clarification. I saw Cisco 3560E is End of Life. I guess 3560-X is not?
02-04-2015 01:53 AM
Hi Reza,
I am talking about Cisco 3650 switch which is stackable; and you have referred Cisco 3560-X. I think we are talking about 2 different product. Can you please comment?
01-27-2015 09:12 AM
Erm... I think that quote explains it quite clearly.
02-02-2015 05:42 PM
Hi Aaron,
you see Reza has answered that I don't have to buy IP services Enhanced Multilayer Engine. In place of that I need to order License to use RIP V2 along with the IP Base image when I will order the switch. Do you also agree with this view?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide