According to documentation Cisco RPS 675 should have support for Cisco 3750v2 switch
(WS-C3750V2-48PS).What kind of cable should be used to connect them?
Cisco RPS has 16 pins and 3750v2 has 22 pins.I could not find that type of cable,
Yes, RPS support following devices.
Catalyst 3750 Series SwitchesCatalyst 3560 Series SwitchesCatalyst 3550 Series SwitchesCatalyst 2980G-A SwitchCatalyst 2970 Series SwitchesCatalyst 2950 Series SwitchesCatalyst 2900 LRE XL Switches
You may get complete info in the following link.http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps7148/ps5066/product_data_sheet09186a0080150e31_ps628_Products_Data_Sheet.html
http://www.cisco.com/en/US/docs/switches/power_supplies/rps675/hardware/installation/guide/rpsoview.htmlI think the six connectors what you can use to connect the switches.
Please rate all the helpfull posts.Regards,Naidu.
It seems that 3750v2 can be connected only to new Cisco RPS 2300,there is no mention of 22-16 pins rps connector anywhere...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: