cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1163
Views
0
Helpful
1
Replies

Cisco 3845 - archive command time-period does not work

I have a Cisco 3845 wiht the archive command configured:

archive

path tftp://x.x.x.x/$h

write-memory

time-period 60

The archive command works with the execution of the write mem, but with the "time-period" doesn't work.

Am I doing something wrong?

Or Do you know if my IOS is affected for some bug?...

This is the show version of my 3845:

NTP_Server#SH VER

Cisco IOS Software, 3800 Software (C3845-SPSERVICESK9-M), Version 12.3(14)T7, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2006 by Cisco Systems, Inc.

Compiled Thu 23-Mar-06 01:59 by pwade

ROM: System Bootstrap, Version 12.3(11r)T1, RELEASE SOFTWARE (fc1)

NTP_Server uptime is 19 weeks, 5 days, 17 hours, 24 minutes

System restarted at 19:20:38 MEXICO Tue May 29 2012

System image file is "flash:c3845-spservicesk9-mz.123-14.T7.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 3845 (revision 1.0) with 224256K/37888K bytes of memory.

Processor board ID FHK0846F193

2 Gigabit Ethernet interfaces

1 Subrate T3/E3 port

DRAM configuration is 64 bits wide with parity enabled.

479K bytes of NVRAM.

62592K bytes of ATA System CompactFlash (Read/Write)

Configuration register is 0x2102

I'll appreciate all of your aportations.

Thanks a lot.

Héctor.

1 Reply 1

MICHAEL OLIVER
Level 1
Level 1

Hector, did you ever find a solution to this? I am running into the same (I think) problem with a 3640 that is also running 12.3(14)T7 (c3640-ik9o3s-mz.123-14.T7.bin to be specific) and I have not found a solution. When manually issuing the 'wr' command the config is copied to the tftp server in whole, but the time-period automation only saves a very small file with only 'boot-start-marker' and 'boot-end-marker'. Very odd.

EDIT: I discovered another thread that described exactly the same behavior:

https://supportforums.cisco.com/thread/2065652

I followed the example at the very end of the thread and created a kron job to initiate the 'archive config' command. It's a hack, but works.


-- 
Mike Oliver, KT2T
(please use personal methods of contact, not my AT&T contact info)
+1-863-606-8008
mwoliver@gmail.com
@mwoliver

-- Mike Oliver, KT2T (please use personal methods of contact, not my AT&T contact info) +1-863-606-8008 mwoliver@gmail.com @mwoliver
Review Cisco Networking for a $25 gift card