CISCO 4500 catalyst switch

[sanju250.shukla]

Hi Friends,

I have purhased one WS-C4510R+E  switch with the supervisor engine WS-X45-SUP7-E

.Now my question is which image it will support to run this engine whereas cisco guys have suggested S45UK9-32-1502SG image base.

Please solve my problem.

Thanks.

[dominic.caron]

I dont think 15.0 support the SUP7-E, I run  IOS XE 3.3.1SG on my switch or 3.2 XO for sup7L-E

[Ivan Shirshin]

Hi,

See all compatible releases here:

http://www.cisco.com/cisco/software/release.html?mdfid=283289791&flowid=19255&softwareid=282046477&release=3.3.1SG&relind=AVAILABLE&rellifecycle=ED&reltype=latest

E.g.:

     cat4500e-universal.SPA.03.02.00.SG.150-2.SG.bin

     cat4500e-universal.SPA.03.02.02.SG.150-2.SG2.bin

     cat4500e-universal.SPA.03.03.01.SG.151-1.SG1.bin

and others.

Table 2 in the following document lists corresponding part numbers for 3.3.xSG, e.g. S45EUK9-33-1511SG:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_26675-01.html

Kind Regards,
Ivan Shirshin

**Please grade this post if you find it useful.