11-01-2017 07:37 PM - edited 03-08-2019 12:35 PM
Hi guys,
Planning to do an IOS change from cat4500e-universalk9.SPA.03.07.00.E.152-3.E.bin to
cat4500e-universalk9.SPA.03.06.07.E.152-2.E7.bin
Is there anything i need to look into or a normal download the IOS into the flash and change the boot command will work?
Thanks.
Solved! Go to Solution.
11-02-2017 01:04 AM
@hamm3rm00re wrote:
normal download the IOS into the flash and change the boot command will work?
Yes.
11-02-2017 07:46 AM
Both switch in the VSS cluster will need to be reloaded.
Here is a link to the ISSU compatibility matrix
http://docwiki.cisco.com/wiki/Catalyst_4500/4900_series_ISSU_compatibility_matrix
11-02-2017 01:04 AM
@hamm3rm00re wrote:
normal download the IOS into the flash and change the boot command will work?
Yes.
11-02-2017 07:46 AM
Both switch in the VSS cluster will need to be reloaded.
Here is a link to the ISSU compatibility matrix
http://docwiki.cisco.com/wiki/Catalyst_4500/4900_series_ISSU_compatibility_matrix
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide