i have 3 vlans, vlan1 , vlan 10 and vlan 20 with vlan interface for intervlan routing and vtp configrued on my 4503-E switch because i have also two stacked 3750 switch in the network. i connect cisco 4503 switch with 3com 7700 switch using trunk ports. now the problem is that from 3com 7700 switch host are able to ping all 3 vlans but from cisco 4503 vlan 10 and vlan 20 are not able to ping host connected to 3com 7700 switch.
Cisco Digital Network Architecture Center Modules(Design Module)Part.2In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and availability to con...
Connectivity Design considerations and recommendation
1.Management Access connectivity
If there is a dedicated OOB management path, consider connecting to CIMC and MGMT port.
If OOB path is not available, Connect the dedicated Management port to LAN Swi...
Cisco Digital Network Architecture Center Modules In this article, we are going to talk about Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and scalability to configure multiple fabric sites a...
This document provides an overview of DPDK and steps to configure and troubleshoot DPDK for OVS in NFVIS.
DPDK stands for Data Plane Development Kit, is a set of libraries that improves data plane performance.DPDK description