08-30-2017 12:55 AM - edited 03-08-2019 11:53 AM
Hi All,
I need your help to understand about 6500 series supported USB drives and or USB drive formats.
Recently I tried to copy the firmware image for SUP-8E from USB for C6507R+E VSS Switch.
But when I check the directory usb0:, no usb were detected.
Is there any specific vendor USB drives are only supported ?
Is there any specific USB formats supported ( NTFS / FAT / FAT32..)
Please provide your suggestions.
Thank you.
Mithun Raam
08-30-2017 01:19 AM - edited 08-30-2017 01:19 AM
Depends on the make and size of the USB stick. Not all manufacturers and sizes are supported. I have good success with the Samsung Bar (above). Don't get anything larger than 16 Gb.
08-30-2017 05:04 AM
Is there any specific vendor USB drives are only supported ?
Yes, I beleive only Cisco's are supported.
However, as Leo noted, some other USB sticks may be found to work.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: