Cisco 6509 + 10GB modules

ross_rulz · ‎10-17-2011

Hi Guys,

Can someone please tell me if its possible to have a 8 port 10GB module for our 6509? If not what do I need to do to get it working with this module? Any help would be appreciated.

Cheers,

Ross.

CH-6509#show mod
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
1    8 8 port 1000mb GBIC Enhanced QoS        WS-X6408A-GBIC     SAL06240ZNC
2   16 SFM-capable 16 port 1000mb GBIC        WS-X6516A-GBIC     SAL0805TR3N
3   48 SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX     SAL1328TT1C
4   48 SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX     SAL1118MZJW
5    2 Supervisor Engine 720 (Hot)            WS-SUP720-BASE     SAD081005AU
6    2 Supervisor Engine 720 (Active)         WS-SUP720-BASE     SAD082008VB
7   48 SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX     SAL1407BJ30
8   48 SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX     SAD0816060G
9   48 SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX     SAD07470450

Mod MAC addresses                       Hw    Fw           Sw           Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0009.11bf.8980 to 0009.11bf.8987   2.1   5.4(2)       8.3(0.156)RO Ok
2 0008.7dca.87fc to 0008.7dca.880b   3.0   7.2(1)       8.3(0.156)RO Ok
3 0026.0b7e.25a0 to 0026.0b7e.25cf 11.3   7.2(1)       8.3(0.156)RO Ok
4 001b.54e7.ef60 to 001b.54e7.ef8f 11.1   7.2(1)       8.3(0.156)RO Ok
5 000d.2910.2eec to 000d.2910.2eef   3.1   7.7(1)       12.2(18)SXD Ok
6 000d.bda4.0180 to 000d.bda4.0183   3.1   7.7(1)       12.2(18)SXD Ok
7 68ef.bd5e.89a0 to 68ef.bd5e.89cf 11.3   7.2(1)       8.3(0.156)RO Ok
8 000f.f74b.9fda to 000f.f74b.a009 10.0   7.2(1)       8.3(0.156)RO Ok
9 000d.ed72.c2a0 to 000d.ed72.c2cf   6.0   7.2(1)       8.3(0.156)RO Ok

Mod Sub-Module                  Model              Serial        Hw     Status
--- --------------------------- ------------------ ------------ ------- -------
5 Policy Feature Card 3       WS-F6K-PFC3A       SAD081005T1   2.2    Ok
5 MSFC3 Daughterboard         WS-SUP720          SAD081007T2   2.2    Ok
6 Policy Feature Card 3       WS-F6K-PFC3A       SAD081909J9   2.3    Ok
6 MSFC3 Daughterboard         WS-SUP720          SAD082009YZ   2.2    Ok

Mod Online Diag Status
--- -------------------
1 Pass
2 Pass
3 Pass
4 Pass
5 Pass
6 Pass
7 Pass
8 Pass
9 Pass
CH-6509#

CH-6509#show ver
Cisco Internetwork Operating System Software
IOS (tm) s72033_rp Software (s72033_rp-JK9S-M), Version 12.2(18)SXD, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Thu 29-Jul-04 00:26 by cmong
Image text-base: 0x4002100C, data-base: 0x42698000

ROM: System Bootstrap, Version 12.2(14r)S9, RELEASE SOFTWARE (fc1)
BOOTLDR: s72033_rp Software (s72033_rp-JK9S-M), Version 12.2(18)SXD, RELEASE SOFTWARE (fc2)

CH-6509 uptime is 1 year, 50 weeks, 2 days, 17 minutes
Time since CH-6509 switched to active is 35 weeks, 21 hours, 12 minutes
System returned to ROM by Stateful Switchover (SP by power-on)
System restarted at 15:46:48 Aust_WA Fri Oct 30 2009
System image file is "sup-bootflash:s72033-jk9s-mz.122-18.SXD.bin"

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C6509 (R7000) processor (revision 3.0) with 458720K/65536K bytes of memory.
Processor board ID TBP06290039
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
29 Virtual Ethernet/IEEE 802.3 interface(s)
268 Gigabit Ethernet/IEEE 802.3 interface(s)
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102

Joseph W. Doherty · ‎10-17-2011

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

You're thinking a 6708?

Since you're running 12.2(18)SXD, you might want to check release notes and see if the card is supported on that version of an IOS. If not, you'll need to upgrade to a newer IOS.

Other than that, since your chassis is fully loaded, you might also check you'll have enough power. However, since you'll need to swap a card, it's likely you'll have enough power, but still worth double checking.