Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

Hello, Cisco Community!I’m really happy to share that I’ll be hosting the Cisco Community Lab Series, a brand-new hands-on learning journey designed to help you build practical networking skills step by step.Every Thursday at 8 PM EST, I’ll post a ne...

Hi,I am having issues with 'telnet' on port 2821 to a range of servers connecting through vlan interface from my core switch 6513 running s72033_rp-ADVIPSERVICESK9_WAN-VM) version 12.2(33)SXH7, RELEASE SOFTWARE (fc3). The telnet on port 1556 and 1372...

jpugliese by Level 1
  • 564 Views
  • 1 replies
  • 0 Helpful votes

I have a question about ARP. assuming two PCs [PC1]IP:1.1.1.1 netmask :255.255.255.0gateway:1.1.1.1[PC2]IP:2.2.2.2 netmask:255.255.255.0gateway:2.2.2.2 why can these two PCs ping each other successfully?  I thought they are on different network . muc...

dannan lin by Level 1
  • 1628 Views
  • 11 replies
  • 0 Helpful votes

Hi All,I have a strange problem on a site of our company.I try to insert a picture, to make the situation easily understandable. The problem: After I have connected one more PC to the unmanaged switch, it cannot connect to network neither by DHCP IP,...

Hi,i was reading a topic of redistribution and manipulation of the routing information and one of the requirements is to set a tag of 5 to  some routes through rout-map as in the following clauses:route-map eigrp-into-ospf permit 18  match ip address...

hanyawad by Level 1
  • 3985 Views
  • 5 replies
  • 0 Helpful votes

I just wanted to clarify a few things.When you have Switch A and Switch B connected together via a trunk. Let's this link is a 100mbps link, so it has a STP cost of 19,and I want it to have a cost of 10 on Switch B. As far as I know, all you do is ru...

Hi all,I have few problems with my 877w and I was hoping someone can help me.1. NTP serverWhen I setup NTP server to take time from uk.pool.ntp.org everything is working fine but as soon as I reset my router during boot I can see that router is first...

Supervisor Engine 720 options support centralized forwarding rates up to 30Mpps and distributed forwarding rates up to 400Mpps. I never understoond the claim of forwarding rate logic in mpps. How i can load the 6509 box to check this forwarding rate?...

mukupatil by Level 1
  • 1778 Views
  • 3 replies
  • 0 Helpful votes

Resolved! pc to router

hi all im learning ccna and have a lab at home,and doin some labs,now i know the connection between pc and router should be crossover cable but thinking i had a crossover i plugged in a straight through cable and the lab worked so when i realised i c...

Is it permissible to create an iBGP adjacency between two N7ks over the vPC peer link using an SVI for a VLAN carried on the vPC Peer Link, or is a separate routed or L2 link required? Each N7k will also have an eBGP session to an upstream layer, so ...

Hello Everybody.I have a question, maybe a simple "classical" case study, I'm sorry, but I cannot figure out how to come out of this.I have a network where if an end user attaches an hub to the network, or rather one of those cheap unmanaged 8-port m...

Netnux by Level 1
  • 4066 Views
  • 5 replies
  • 0 Helpful votes