09-10-2012 09:08 AM - last edited on 03-25-2019 04:21 PM by ciscomoderator
Hi,
I have a 6509 switch with SSO Redundancy (STANDBY HOT)
with IOS ver 12.2(17d)SXB11, RELEASE SOFTWARE (fc1) (c6k222-jk9sv-mz.122-17d.SXB11.bin). I need to upgrade the IOS on this switch.
I have 512MB Memory on the switch and 40144896 bytes free on Disk0.
Could you please let me know which IOS is the latest version to upgrade and also give me some hints for IOS upgrade on this switch?
Thanks,
Mike
Solved! Go to Solution.
09-10-2012 04:34 PM
If you have Sup-2 with MSFC 2 the latest image on CCO is:
s222-adventerprisek9_wan-mz.122-18.SXF17b.bin
With 64Mb flash and 256 Mb DRAM requirement.
HTH
09-11-2012 08:56 AM
Mike,
You would need to copy the image into the bootflash and also slavebootflash. Change the boot parameters and reboot the chassis.
Good Luck
09-10-2012 02:33 PM
Hi,
How much total flash do you have?
can you post
dir flash
or
sh flash
HTH
09-10-2012 02:42 PM
#sh flash:
Open device slot0 failed (No device available)
#dir flash:
%Error opening slot0:/ (No device available)
#dir slavebootflash:
Directory of slavebootflash:/
No files in directory
31981568 bytes total (31981568 bytes free)
#dir sup-bootflash:
Directory of sup-bootflash:/
31981568 bytes total (2217380 bytes free)
Note: I am going to upgrade the flash by next week.
Thanks,
Mike
09-10-2012 02:49 PM
What model sup are you using?
Can you post "sh redu"?
Thanks,
09-10-2012 02:52 PM
Slot 1 : Active
Slot 2 : Standby
ACTIVE INFO :
RP:
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-JK9SV-M), Version 12.2(17d)SXB11, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Tue 15-Nov-05 14:25 by pwade
SP:
Cisco Internetwork Operating System Software
IOS (tm) c6s2p2_sp Software (c6s2p2_sp-SPV-M), Version 12.2(17d)SXB11, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Tue 15-Nov-05 14:28 by pwade
STANDBY INFO :
Standby up
RP:
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-JK9SV-M), Version 12.2(17d)SXB11, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Tue 15-Nov-05 14:25 by pwade
SP:
Cisco Internetwork Operating System Software
IOS (tm) c6s2p2_sp Software (c6s2p2_sp-SPV-M), Version 12.2(17d)SXB11, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Tue 15-Nov-05 14:28 by pwade
09-10-2012 04:34 PM
If you have Sup-2 with MSFC 2 the latest image on CCO is:
s222-adventerprisek9_wan-mz.122-18.SXF17b.bin
With 64Mb flash and 256 Mb DRAM requirement.
HTH
09-11-2012 08:15 AM
Thank you Reza,
I just ordered 2x 64MB Cisco Systems Catalyst 6000 Sup Eng 2 ATA Flash Card for it. Would you please let me know the upgrade process? the switch is running in native mode (IOS) , Do I have to copy the IOS into the Flash and then change the boot parameters? How can I do it for the other Sup?
Thanks,
Mike
09-11-2012 08:56 AM
Mike,
You would need to copy the image into the bootflash and also slavebootflash. Change the boot parameters and reboot the chassis.
Good Luck
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide