Cisco 8200L-1N-4T

[Hayat Zarin]

Hello everyone one I have cisco 8200L router I want to upload ios from USB ( 8gb 2.0) the following error is showing. 

media drive (usbflash0:) failed. error code: 0x2

When I try to upload through tftp the following error is showing. 

monitor: command "tftpdnld" not found. 

what is issue. 

@Cisco Support

[Flavio Miranda]

@Hayat Zarin 

 Take a look on this table where cisco mention USB 3.0

https://www.cisco.com/c/en/us/td/docs/routers/cloud_edge/c8300/software_config/cat8300swcfg-xe-17-book/isr9000swcfg-xe-16-12-book_chapter_0111.html

File Systems

The following table provides a list of file systems that can be seen on the Cisco Catalyst 8000 Series Edge Platform.

Table 1. Device File Systems

File System	Description
bootflash:	Boot flash memory file system.
flash:	Alias to the boot flash memory file system above.
harddisk:	Hard disk file system (NVME-M2-600G or USB-M2-16G or USB-M2-32G with the CLI command harddisk).
cns:	Cisco Networking Services file directory.
nvram:	Device NVRAM. You can copy the startup configuration to NVRAM or from NVRAM.
obfl:	File system for Onboard Failure Logging (OBFL) files.
system:	System memory file system, which includes the running configuration.
tar:	Archive file system.
tmpsys:	Temporary system files file system.
usb0: USB 3.0 Type- A usb1: USB 3.0 Type-B	The Universal Serial Bus (USB) flash drive file systems. Note   The USB flash drive file system is visible only if a USB drive is installed in usb0: or usb1: ports.

[Hayat Zarin]

@Flavio Miranda sir USB 3.0 also tried but same error showing

[Flavio Miranda]

Make sure you formated It in FAT and use 4giga  pendriver

[Leo Laohoo]

---

@Hayat Zarin wrote:
media drive (usbflash0:) failed. error code: 0x2

---

Translation:  The USB flash drive used is not compatible.  

Find a different variety.  I use brands like Toshiba or Lexar.  

[Hayat Zarin]

@Leo Laohoo sir Toshiba or lexar means can you explain

[liviu.gheorghe]

Hello @Hayat Zarin ,

please make sure your usb drive is formatted FAT32.

Hope this helps.

[Hayat Zarin]

@liviu.gheorghe sir USB formated with FAT 32