09-04-2010 01:05 PM - edited 03-06-2019 12:49 PM
I have an 871 wireless router (c870-advipservicesk9-m version 15.1) and the c2960 switch (c2960-lanbasek9-m version 12.2). I was wondering if i can use the 871 to route between vlans on the c2960. I need to have 7 vlans setup on the network but the 871 only supports 4 vlans in its database. I know I can create more than 4 vlans on c2960's database but I don't how or if it's even possible to route between those vlans using the 871.
Solved! Go to Solution.
09-05-2010 06:38 PM
Thanks for that.
09-05-2010 07:49 PM
Hi Lei,
Just tried IOS versions 12.4(15)XY5, 12.4(11)XW10, and 12.4(4)XC7 and all three 12.4 will support 2 VLANs.
It looks like only 12.3 will support 10 VLANs. Too bad.
09-05-2010 08:02 PM
Hi Leo,
Thanks for testing it out!
09-05-2010 08:49 PM
Thanks Lei.
09-08-2010 12:11 PM
Hey Leo,
Do you know if version 12.3 supports DMVPN? I'm not able to find that it does.
09-08-2010 04:13 PM
Hello,
12.3 supports DMVPN. You can check it through the following link:
www.cisco.com/go/fn
Regards,
NT
09-07-2010 02:34 PM
THANK YOU ALL!!!
You've been very helpful! I will look into downgrading to 12.3.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide