hello, Still is not working.

robert.crisan · ‎03-16-2014

I have a cisco 871 router and I am not able to make a pppoe connection with ISP.

Config:
Building configuration...

Current configuration : 2043 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname home_gateway
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$G3f1$Le8WUWVfpRAUnS0wfIJDA0
!
no aaa new-model
!
!
!
!
ip cef
!
!
no ip dhcp use vrf connected
ip dhcp excluded-address 10.0.0.1
!
ip dhcp pool AP
network 10.0.0.0 255.255.255.0
default-router 10.0.0.1
!
!
no ip domain lookup
ip domain name limelite
!
multilink bundle-name authenticated
!
!
username admin password 0 cisco
archive
log config
hidekeys
!
!
!
!
!
interface FastEthernet0
switchport access vlan 100
!
interface FastEthernet1
switchport access vlan 100
!
interface FastEthernet2
switchport access vlan 100
!
interface FastEthernet3
switchport access vlan 200
!
interface FastEthernet4
description Link to WAN
no ip address
ip nat outside
ip virtual-reassembly
ip route-cache flow
duplex auto
speed auto
pppoe enable
pppoe-client dial-pool-number 1
!
interface Vlan1
no ip address
!
interface Vlan100
ip address 192.168.2.1 255.255.255.0
ip nat inside
ip virtual-reassembly
!
interface Vlan200
ip address 10.0.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
!
interface Dialer1
description ISP DialIn
ip address negotiated
ip mtu 1492
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1452
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap chap callin
ppp chap hostname xxx
ppp chap password 0 xxx
ppp pap sent-username xxx password 0 xxx
!
ip route 0.0.0.0 0.0.0.0 Dialer1
!
!
no ip http server
no ip http secure-server
ip nat inside source list 1 interface Dialer1 overload
!
access-list 1 permit 192.168.2.0 0.0.0.255
access-list 1 permit 10.0.0.0 0.0.0.255
dialer-list 1 protocol ip permit
!
!
!
!
control-plane
!
!
line con 0
logging synchronous
login local
no modem enable
line aux 0
line vty 0 4
login local
transport input telnet ssh
!
scheduler max-task-time 5000

!
webvpn cef
end

home_gateway#sh ip int brief
Interface IP-Address OK? Method Status Protocol
FastEthernet0 unassigned YES unset up up
FastEthernet1 unassigned YES unset up down
FastEthernet2 unassigned YES unset up down
FastEthernet3 unassigned YES unset up down
FastEthernet4 unassigned YES manual up up
Vlan1 unassigned YES NVRAM up down
NVI0 unassigned NO unset up up
Vlan100 192.168.2.1 YES NVRAM up up
Vlan200 10.0.0.1 YES NVRAM up down
Dialer1 188.25.128.187 YES IPCP up up
Virtual-Access1 unassigned YES unset up up

I am able to get an ip address. But cannot ping into internet.

home_gateway#ping 8.8.8.8 source vlan 100

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 8.8.8.8, timeout is 2 seconds:
Packet sent with a source address of 192.168.2.1
.....
Success rate is 0 percent (0/5)
home_gateway#traceroute 8.8.8.8 source vlan 100

Type escape sequence to abort.
Tracing the route to 8.8.8.8

1 * * *
2 * *

Nat translations are making.

home_gateway#sh ip nat tra
Pro Inside global Inside local Outside local Outside global
icmp 188.25.128.187:3 192.168.2.1:3 8.8.8.8:3 8.8.8.8:3
udp 188.25.128.187:49166 192.168.2.1:49166 8.8.8.8:33434 8.8.8.8:33434
udp 188.25.128.187:49167 192.168.2.1:49167 8.8.8.8:33435 8.8.8.8:33435
udp 188.25.128.187:49168 192.168.2.1:49168 8.8.8.8:33436 8.8.8.8:33436
udp 188.25.128.187:49169 192.168.2.1:49169 8.8.8.8:33437 8.8.8.8:33437
tcp 188.25.128.187:54211 192.168.2.10:54211 81.161.59.31:80 81.161.59.31:80
tcp 188.25.128.187:54212 192.168.2.10:54212 54.208.162.210:80 54.208.162.210:80
tcp 188.25.128.187:54221 192.168.2.10:54221 81.161.59.31:80 81.161.59.31:80
tcp 188.25.128.187:54222 192.168.2.10:54222 54.236.215.239:80 54.236.215.239:80
udp 188.25.128.187:56128 192.168.2.10:56128 5.14.64.48:40572 5.14.64.48:40572
udp 188.25.128.187:56128 192.168.2.10:56128 79.117.219.236:24111 79.117.219.236:24111
udp 188.25.128.187:56128 192.168.2.10:56128 86.125.250.226:60404 86.125.250.226:60404
udp 188.25.128.187:56128 192.168.2.10:56128 188.24.8.159:17835 188.24.8.159:17835
home_gateway#

home_gateway#sh ip ro
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route

Gateway of last resort is 0.0.0.0 to network 0.0.0.0

C 192.168.2.0/24 is directly connected, Vlan100
S* 0.0.0.0/0 is directly connected, Dialer1

Any suggestions for what can be the problem?

johnlloyd_13 · ‎03-16-2014

hi,

looks like a default route problem.

could you try:

no ip route 0.0.0.0 0.0.0.0 dialer1

int dialer1
ppp ipcp route default
ppp ipcp dns request accept

bounce the WAN and monitor:

int f4

shut

no shut

robert.crisan · ‎03-16-2014

Hello,

Thank you for the answer!

I have tried.

The static route it's not recieved. I have only the connected links in the routing table.

home_gateway#sh ip ro
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route

Gateway of last resort is 0.0.0.0 to network 0.0.0.0

C 192.168.2.0/24 is directly connected, Vlan100

Try to sh, no sh the fa4 interface. I also gave a router electrical reset. No result..

johnlloyd_13 · ‎03-16-2014

hi,

i re-checked your config, could you add: ip routing in global config.

make a shut/no shut on the WAN but this time on dialer1 interface.

put back the static route ip route 0.0.0.0 0.0.0.0 dialer1 if still not working.

robert.crisan · ‎03-17-2014

hello,

Still is not working. Ip routing is activated by default and ip classless too in 12.4 ios version.

I have deleted the dialer interface and reconfig it. Then tried first with the ppp ipcp route default, but still not receiving the default route.

I have been putting back the static route with dialer 1 exit interface.

interface Dialer1
mtu 1492
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1452
dialer pool 1
dialer-group 1
ppp pap sent-username bb1011991 password 7 005D45505D03535659761C
ppp ipcp dns request
ppp ipcp route default

interface FastEthernet4
no ip address
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1

All the same, I recieve Ip address.

gateway#sh ip int brief
Interface IP-Address OK? Method Status Protocol
FastEthernet0 unassigned YES unset up up
FastEthernet1 unassigned YES unset up down
FastEthernet2 unassigned YES unset up down
FastEthernet3 unassigned YES unset up down
FastEthernet4 unassigned YES manual up up
Vlan1 unassigned YES NVRAM administratively down down
NVI0 unassigned NO unset up up
Vlan100 192.168.2.1 YES NVRAM up up
Vlan200 10.0.0.1 YES NVRAM up down
Dialer1 188.27.188.38 YES IPCP up up
Virtual-Access1 unassigned YES unset up up

I have debuged ip routing and ppp packet, this is what I got.

Ppp packet

gateway#ping 8.8.8.8 source vlan 100

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 8.8.8.8, timeout is 2 seconds:
Packet sent with a source address of 192.168.2.1

*Mar 15 19:31:37.634: Vi1 LCP: O ECHOREQ [Open] id 11 len 12 magic 0x1F9E0BC9
*Mar 15 19:31:37.634: Vi1 LCP-FS: I ECHOREP [Open] id 11 len 12 magic 0xE49B3E1C
*Mar 15 19:31:37.634: Vi1 LCP-FS: Received id 11, sent id 11, line up
*Mar 15 19:31:38.558: Vi1 PPP: O pkt type 0x0021, datagramsize 102.
*Mar 15 19:31:40.558: Vi1 PPP: O pkt type 0x0021, datagramsize 102.
*Mar 15 19:31:42.558: Vi1 PPP: O pkt type 0x0021, datagramsize 102.
*Mar 15 19:31:44.558: Vi1 PPP: O pkt type 0x0021, datagramsize 102.
*Mar 15 19:31:46.558: Vi1 PPP: O pkt type 0x0021, datagramsize 102.
Success rate is 0 percent (0/5)

Ip routing

*Mar 15 19:32:08.114: IP-Static: 0.0.0.0 0.0.0.0 Dialer1 Path = 1, route table no change, recursive flag clear
*Mar 15 19:33:06.961: IP: s=192.168.2.1 (local), d=8.8.8.8 (Dialer1), len 100, sending.
*Mar 15 19:33:08.113: RT: NET-RED 0.0.0.0/0

robert.crisan · ‎03-18-2014

At a debug ip icmp, I recieve a lot of messages like this, without doing anything on the router:

gateway#
*Mar 16 15:51:49.580: ICMP: dst (188.27.166.205) port unreachable sent to 62.33.49.10
gateway#
*Mar 16 15:51:51.608: ICMP: dst (188.27.166.205) port unreachable sent to 5.228.115.236
gateway#
*Mar 16 15:51:52.772: ICMP: dst (188.27.166.205) port unreachable sent to 62.33.49.10
*Mar 16 15:51:53.392: ICMP: dst (188.27.166.205) port unreachable sent to 62.85.40.90
gateway#
*Mar 16 15:51:55.172: ICMP: dst (188.27.166.205) port unreachable sent to 91.142.9.213
*Mar 16 15:51:55.760: ICMP: dst (188.27.166.205) port unreachable sent to 31.147.78.226
gateway#
*Mar 16 15:51:56.440: ICMP: dst (188.27.166.205) port unreachable sent to 31.28.50.36
gateway#
*Mar 16 15:51:57.488: ICMP: dst (188.27.166.205) port unreachable sent to 93.138.134.23
gateway#
*Mar 16 15:51:59.032: ICMP: dst (188.27.166.205) port unreachable sent to 62.33.49.10
gateway#
*Mar 16 15:52:01.260: ICMP: dst (188.27.166.205) port unreachable sent to 178.223.220.212
gateway#
*Mar 16 15:52:02.720: ICMP: dst (188.27.166.205) port unreachable sent to 62.85.40.90
gateway#
*Mar 16 15:52:04.516: ICMP: dst (188.27.166.205) port unreachable sent to 178.223.220.212
*Mar 16 15:52:05.312: ICMP: dst (188.27.166.205) port unreachable sent to 5.15.21.74
gateway#
*Mar 16 15:52:06.584: ICMP: dst (188.27.166.205) port unreachable sent to 176.215.40.179
gateway#
*Mar 16 15:52:08.040: ICMP: dst (188.27.166.205) port unreachable sent to 92.100.97.79
*Mar 16 15:52:08.212: RT: NET-RED 0.0.0.0/0
gateway#
*Mar 16 15:52:09.864: ICMP: dst (188.27.166.205) port unreachable sent to 176.215.40.179
*Mar 16 15:52:10.752: ICMP: dst (188.27.166.205) port unreachable sent to 178.223.220.212
gateway#
*Mar 16 15:52:11.340: ICMP: dst (188.27.166.205) port unreachable sent to 92.100.97.79
*Mar 16 15:52:12.292: ICMP: dst (188.27.166.205) port unreachable sent to 62.65.194.60
gateway#
gateway#
*Mar 16 15:52:12.964: ICMP: dst (188.27.166.205) port unreachable sent to 87.56.113.203
*Mar 16 15:52:13.772: ICMP: dst (188.27.166.205) port unreachable sent to 78.51.79.26

Can anyone know what could be the problem?

Cisco 871 PPPoE problem