cisco 9200 flash

[furio]

the sh flash give me the 846200832 bytes available (1011351552 bytes used)

the total files length  is 495013974 not 1011351552.

I removed an old bin file (about 500Mb) but  it looks like it hasn't been removed

the file does not appear in sh flash command.

Suggestions ?

[furio]

thanks for the reply and for the solutions.

Can I also try to format the flash?

For me is a simple solution. Remove all the stacking cables is very difficult for me, this means blocking the entire stack.

[Leo Laohoo]

Emergency-Install is very similar to formatting the flash.