Cisco 9300 Layer 3 Support

[Learnercisco]

Hi Tech Guys,

Please confirm if i can use the layer 3 functionality in access switches 9300 with NETWORK ESSENTIAL LICENSE.

SWITCH MODEL: C9300-48P-E

Requirment: i want to  connect Server to Access switch with Layer 3 interface. (Server does not support Layer 2 VLAN).

can i achieve this in my switch to have a Network Essentail Licence. 

can u breif what type of Layer 3 functionalities are available in cisco 9300 access switches including network essentials license

Thanks in advance. 

[Leo Laohoo]

See attachment.  

Go to page 5.  Ignore the green boxes and look at the blue boxes. 

[Learnercisco]

Thanks for sharing this files,

i want to get this info below in cisco 9300 network essentails license.

Could we achive by making Layer 3 etherchannel with Core/Distribution and run ospf/eigrp for layer 2 routed access.?

thanks.

[Leo Laohoo]

Layer 3 etherchannel, yes.
OSPF/EIGRP, only stub.

[Learnercisco]

thanks for your answers,

Can we  achieve point to point layer 3 conection between Access switch (essential Licence) with Server if the server  doesnt not support layer 2 VLAN. 

[Leo Laohoo]

---

@Learnercisco wrote:

Can we  achieve point to point layer 3 conection between Access switch (essential Licence) with Server if the server  doesnt not support layer 2 VLAN. 

---

This has nothing to do with license. 

Point-to-point means both ends must "agree" on something.  If one end is a Layer 3 link then the other end must also support Layer 3.  

Server doesn't necessarily support VLAN.  As long the end point has an IP address, correct subnet mask, and a valid default gateway it should be fine.  But those links to the server doesn't necessarily have to be a Layer 3.