Cisco 9300 stack connection

[ccnaluna93]

Hi guys!

Is this cisco9300 stack diagram accurate? I've already looked at the Cisco datasheet, but the images are a bit confusing.

[gtrejoor]

That is the suggested set-up, with that configuration you have full redundancy with Stackwise and StackPower 

References

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/hardware/install/b_c9300_hig/b_c9300_hig_chapter_010.html

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9300-series-switches/white-paper-c11-741468.html

Regards, 

[ccnaluna93]

Thanks, so the diagram is correct, right?

[balaji.bandi]

yes correct.

good reference :

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9300-series-switches/white-paper-c11-741468.html

installation guide :

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/hardware/install/b_c9300_hig/b_c9300_hig_chapter_010.html