Add Installation File Flash:cat9k_iosxe.17.06.08.SPa.bin Activation Commit
This is the status of your application.
I_MFDS_9407_2#sh ver
Cisco IOS XE Software, version 17.06.08
Cisco IOS Software [Bengaluru], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 17.6.8, Release Software (fc4)
기술 지원: http://www.cisco.com/techsupport
Copyright (c) 1986-2024, Cisco Systems, Inc.
Saturday, 07-Sept. 24 01:23 Author: McFre
I_MFDS_9407_2#sh module
Chass Type: C9407R
Mode port card type model serial number.
311 Supervisor 1 Module C9400-SUP-1 ccccccccc
411 Supervisor 1 Module C9400-SUP-1
Mode MAC Address HwFw Sw Status
3 cccccccc to dddddddd 1.0 16.6.2r[FC1] 17.06.08 ok
4. Yes
Mode Redundant Role Operation Mode Configuration Mode Redundant Status
3 Active SSO Activity
4 Standby SSO Standby ColdConf
1. In the current situation
Installation activation issue
Commit Installation
If I add it, will it be installed?
2.Remove Mode 3 when upgrading a Mode 4 Super1 module in the current situation
Add Installation File Flash:cat9k_iosxe.17.06.08.SPa.bin Activation Commit
If I do, I'll do it.
or with all the modules installed
install flash:cat9k_iosxe.17.06.08.SPA.bin enable issu commit
Does that make mod 4 super complete installation?
