Cisco 9600 stackwise and 1G support

[carl_townshend]

Hi All

Can anyone tell me if the Cisco 9600 switches now support Stackwise Virtual and also 1Gigabit SFP ?

Many thanks

Carl

[Seb Rupik]

Hi there,

Stackwise virtual is now supported in versions 16.12.1 and above.

A 1G SFP will be supported in any of the SFP+ ports.

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/16-12/release_notes/ol-16-12-9600.html?referring_site=RE&pos=1&page=https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/16-11/release_notes/...

cheers,

Seb.

[MR203]

hi,

 I don't find any 1G sfp that are supported for cat 9600. can you direct me to 1g sfp part number that is supported in cat 9600?

[Scott Hodgdon · Accepted solution]

Carl,

The 1G support is currently on the roadmap for the next IOS XE releases for the 9600. These are planned by end of November, but are subject to timing change.

Cheers,
Scott Hodgdon

Senior Technical Marketing Engineer

Enterprise Networking Group

[a12288]

Hi, there. 

A little bit off topic but your post is the only one related to C9600 I can find on this forum so far. So just like to ask have you install C9600 into production? if so, what is your feedback & feeling compare to C6800 or C6000? Thanks.

Leo