03-17-2010 06:42 AM - edited 03-06-2019 10:10 AM
Hi,
I need to know if Cisco ACE 4710-k9-V3 has been tested with OCS Load Balancing, I see this chart here:
http://technet.microsoft.com/en-us/office/ocs/cc843611.aspx
That says that software version 2.1 is the tested one, but I am not familiar with Cisco naming nomenclature, for example I do not know if the "V3" means the software version (as in the chart 2.1).
So if you guys can help me with this I will appreciate.
Thanks
Solved! Go to Solution.
03-23-2010 05:54 AM
hello Andres,
I would say you have a newer image.
to be noted the microsoft link has a link to a cisco document for deploying load balancing for MS OCS
http://www.cisco.com/en/US/docs/solutions/Verticals/ansmsocs.html
in that document the SW running on ACE was:
>>system: Version A2(1.0) (latest version of ACE code)
you have a newer image
>> system: Version A3(2.0) [build 3.0(0)A3(2.0)
and you should be able to use it for your purposes.
The document provides some options and you should make a choice and then follow the path you have chosen.
Hope to help
Giuseppe
03-17-2010 07:13 AM
Hi Andres,
The latest versions on CCO are A2(2.3), A2(1.6a) and A2(3.0). With A2(2.3) is the very latest.
HTH
Reza
03-17-2010 07:34 AM
Reza
First of all, many thanks for your answer.
Sorry, but I am not familiar with cisco so I do not fully understood what you said. What means CCO? What ACE Version might have the 4710-k9-v3 device?
thanks
03-17-2010 09:11 AM
Hello Andres,
CCO stands for Cisco connection on line and simply indicates the Cisco website.
ACE can be a standalone appliance or a module that can be inserted in a C6500 lan switch.
In your case is the standalone appliance
In any case the ACE has its own operating system and the versions that Reza has reported refer to this.
see this page about this appliance
http://www.cisco.com/en/US/products/ps7027/products_installation_and_configuration_guides_list.html
Hope to help
Giuseppe
03-23-2010 05:06 AM
Ok, I have this C4710 ACE-MZ.A3_2.0
If I see "2.1" on this table http://technet.microsoft.com/en-us/office/ocs/cc843611.aspx, I must upgrade A3_2.0 to A3_2.1 ?
Thanks and sorry for the questions..
EDIT: more info
Software
loader: Version 0.95.1
system: Version A3(2.0) [build 3.0(0)A3(2.0) adbuild_17:35:22-2008/10/01_/a
03-23-2010 05:54 AM
hello Andres,
I would say you have a newer image.
to be noted the microsoft link has a link to a cisco document for deploying load balancing for MS OCS
http://www.cisco.com/en/US/docs/solutions/Verticals/ansmsocs.html
in that document the SW running on ACE was:
>>system: Version A2(1.0) (latest version of ACE code)
you have a newer image
>> system: Version A3(2.0) [build 3.0(0)A3(2.0)
and you should be able to use it for your purposes.
The document provides some options and you should make a choice and then follow the path you have chosen.
Hope to help
Giuseppe
03-23-2010 05:58 AM
Giuslar, I really appreciate your help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide