I am doing a network restructure and supposed to enable Inter-VLAN routing at the ASA and at the same time configure a DHCP server for each subinterfaces for the host in the VLAN to obtain IPs from the ASA. Unfortunately, it seems the trunking functionality on SG200 isn't that good for being web-based and also the hosts on the VLAN aren't able to get IP from ASA. SG200 doesn't have the "ip-helper command or option" to point to the DHCP server. Kindly assist on the resolution for this Network restructure. Find the configs on attached files
Subinterface Configuration
DHCP server pool on subinterface
Switch Trunk on GE30 and Access port for test is GE29
Kindly Assist a way out on this.
.PNG){kind=link}
%20and%20Access%20Port%20(29).PNG){kind=link}