Cisco C1111-8P (1RU) and IPSec - VPN

[amh4y0001]

Hi,

IPSec VPN is supported for the Cisco C1111-8P (1RU) running System image file is "bootflash:c1100-universalk9_ias.16.09.04.SPA.bin"?

If yes, will appreciate a step-by-step guide for the purpose of Site-to-Site VPN configuration?

[balaji.bandi]

You need to have rigtht License to configure VPN :

https://www.cisco.com/c/en/us/td/docs/routers/access/1100/software/configuration/xe-16-7/cisco_1100_series_swcfg_xe_16_7_x/cisco_1100_series_swcfg_chapter_0111.html

step by step Guide  : (make sure you also need other side device and what encryption it support).

http://www.firewall.cx/cisco-technical-knowledgebase/cisco-routers/867-cisco-router-site-to-site-ipsec-vpn.html

https://www.cisco.com/c/en/us/support/docs/cloud-systems-management/configuration-professional/113337-ccp-vpn-routerA-routerB-config-00.html

[amh4y0001]

Thanks for reply Balaji.

This means this Router do support VPN but needs special license. If I am not mistaken, it is special IOS image you meant?

How I can check if my device has correct license?

Also, there is no indicator of the VPN on the front panel (like an LED that shows if VPN is configured /operational), is this normal?

[balaji.bandi]

show license feature

show version

[amh4y0001]

Thanks for reply, see attached output for both commands.

[balaji.bandi · Accepted solution]

as per show version you have ipbase, you need get security License to work for VPN.