Hey everyone,
I'm using a Cisco C1200-48T-4X switch connected to a Dell computer with a MarvellĀ® Scalable mGig AQC113/AQC114/AQC114CS/AQC115C network card.
Unfortunately, I'm unable to get Wake-on-LAN (WoL) to work.
I've connected the network card directly to a 1Gb port on the switch, but the system does not wake up.
BIOS settings have been configured correctly, including enabling "Wake on Magic Packet."
Does anyone have suggestions or possible solutions to get Wake-on-LAN working?
Thanks!
