cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2620
Views
0
Helpful
7
Replies

Cisco c3750X high memory utilization

Hello all.

I've got an issue with memory utilization on 3750x switch. show memory statistic history  command shows that Processor Memory Pool is always 90% used. Original IOS is c3750e-universalk9.mz-12.2.58.SE2.bin, upgraded to 15.0(2)SE7, then downgraded to 12.2(55)SE9 and still the same high utilization, even when the switch is idle and not connected to network. Despite such switch condition seems to me abnormal, I can't say that I feel network usage degradation, anything works great. So should I care about the issue or it's normal switch operation ? Thanks.

Appreciate your help.

7 Replies 7

Leo Laohoo
Hall of Fame
Hall of Fame

If memory, please post the output to the command "sh proc mem sorted | ex 0.00".

Leo Laohoo, thanks for reply. 

I attached log file. It includes show proc memory sorted and show memory statistic history commands

Could you please provide me the output of below command atleast 3 times:-

 

(Reason we need to see which pool is getting exausted and act accordingly)

show processes memory sorted | exclude 0.00

 

Second thing: Can you attach the following additional output:

 

show ver

show log

HTH

Hello, insharie,

does time interval between command output matter ?

 

Leave a span of 1 min.

Here we go, please check attaced files. BTW have a nice weekend..

nando1982_1
Level 1
Level 1
managed to solve, what was done?
Review Cisco Networking for a $25 gift card