Cisco C9200L-48P-4x Upgrade from 16.09.02 to 17.06.4

[Marcelrie]

Hello guys,

I need your help. I need to upgrade the firmware for a new customer of ours. The current version is 16.09.2 and this should be raised to 17.06.4. Can you tell me if I can jump directly to this version? I have read up a little, but I have to make supposedly every minor jump. Is that really the case or are there other options?
Attached is the relation that I have read from the release notes.

C9200:

From	To
16.09.02	16.11.1
16.11.1	16.12.8
16.12.8	17.1.1
17.1.1	17.2.X
17.2.X	17.3.X
17.3.X	17.4.X
17.4.X	17.5.X
17.5.X	17.6.X

[Leo Laohoo]

Direct upgrade is supported.

[Marcelrie]

Thank you for the quick reply.
Really may I know where you have read this? I would then also like to read through this article again. Or is this years of experience ?

[Leo Laohoo]

---

@Marcelrie wrote:
Really may I know where you have read this? I would then also like to read through this article again. 

---

Read the Release Notes.

[edwinmznet@gmail.com]

I have the same dude because i need upgrade from version 16.09.02 to new version 17.09.04, please confirm it's possible.

[balaji.bandi]

Follow below guide : ( same was suggested by @Leo Laohoo 

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9200/software/release/17-9/release_notes/ol-17-9-9200/upgrading_the_switch_software.html

[edwinmznet@gmail.com]

Hi Balaji,

       But my question is, is possible jump directly from version 16.09.02 to new version 17.09.04 or i have junp to intermedly version.

[balaji.bandi]

yes that is the reason we given the document ( have you ever get chance to read ?) 

[Leo Laohoo]

---

edwinmznet@gmail.com wrote:
is possible jump directly from version 16.09.02 to new version 17.09.04 or i have junp to intermedly version.

---

If nobody wants to take the time to read either the Release Notes nor @balaji.bandi's response, no amount of responses will make any difference.