03-21-2018 09:09 AM - edited 03-08-2019 02:20 PM
I have a question on mixing 1Gig SFP's with 10Gig SPF's. I have a customer who added 2 1Gig SFP's in port Gi1/1/1 and Gi1/1/2 then tried to add a 10Gig SFP+ to port Te1/1/3 and a 1gig SFP to port Te1/1/4. I'm not positive but this will not work because I believe you can only add in pairs 2 1gig and 2 10gig or all 4 1Gigs to those ports correct? Uplink ports
Thanks
Solved! Go to Solution.
03-21-2018 01:29 PM
That is correct. Usually, what I have seen is that 2 and 2 will work fine.
Glad to know the issue is resolved.
HTH
03-21-2018 10:44 AM
It depends on the type of uplink module the customer purchased with the switch.
see table-2 for combination
HTH
03-21-2018 01:25 PM
03-21-2018 01:29 PM
That is correct. Usually, what I have seen is that 2 and 2 will work fine.
Glad to know the issue is resolved.
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide