04-15-2020 09:01 AM
Hi,
Is it possible to connect cisco catalyst 9300 OOB port (G0/0) to the front panel data port (G1/0/1) within the same switch? And from the same switch there will be a trunk port to the firewall as the OOB gateway will be at the firewall. Reason being is that there is a lack of dedicated OOB switch.
04-15-2020 11:00 AM - edited 04-15-2020 11:02 AM
Hi,
No, the OOB port (G0/0) is a host port and it should only connect to an OOB switch.
If you don't have an OOB switch, just use a vlan for in-band management.
HTH
04-15-2020 02:47 PM
@daniel.tanch wrote:
Reason being is that there is a lack of dedicated OOB switch.
Then don't connect anything to the Management Port.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide