01-13-2013 10:24 AM - edited 03-07-2019 11:04 AM
Dears,
I have and issues of using non Cisco GLCs when it attached to SFP ports as I get an error massage and ports went to shutdown status, advise how I can resolve that?
Sent from Cisco Technical Support iPad App
Solved! Go to Solution.
01-13-2013 10:26 AM
Hello,
In the global configuration mode, try using the following command:
service unsupported-transceiver
This command has to be fully entered from the keyboard as it is a hidden command that does not appear in interactive help and is not subject to autocompletion.
Best regards,
Peter
01-13-2013 11:51 AM
Hi,
what type of switch is this?
also,
sh interfaces transceiver
or
sh interfaces transceiver pro
may provide you more to see if the transceiver is supported.
HTH
01-13-2013 10:26 AM
Hello,
In the global configuration mode, try using the following command:
service unsupported-transceiver
This command has to be fully entered from the keyboard as it is a hidden command that does not appear in interactive help and is not subject to autocompletion.
Best regards,
Peter
01-13-2013 11:51 AM
Hi,
what type of switch is this?
also,
sh interfaces transceiver
or
sh interfaces transceiver pro
may provide you more to see if the transceiver is supported.
HTH
01-13-2013 11:10 PM
The Cisco Catalyst PN WS-C3750X-12S-S and it mentioned not supported using above commands
Sent from Cisco Technical Support iPad App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide