Cisco configure prof. Express запускается без wizard

[dmitriyarnov]

CCPE запускается, но без wizard, переустанавливал ccpe, не помогает, в чем проблема ? Что делать? Роутер cisco 861

[Mark Malone]

can you provide the config of the router so can see what way its setup ?

[dmitriyarnov]

я вас не понял,
я устанавливаю ccpe с файла скачанного с cisco.com через setup.exe
я сниму видео чтоб вы поняли

I did not understand you, I set ccpe a file downloaded from cisco.com through setup.exe I wanted you to understand video

[Mark Malone]

I don't know what video your talking about ?

I asked for the running configuration to see if you have configured Cisco CP correctly using the HTTPs protocol with authentication in cli so it works and you can access the router that way from a local device ,it requires more than just placing the file in flash to get it working 

[dmitriyarnov]

https://youtu.be/O2hMGec1j5k

my problem. when I first open ccpe no wizard appears

[Mark Malone]

I cant see from that video what configuration has been put on the router to support cpe

[dmitriyarnov]

my problem. when I first open ccpe no wizard appears

[Mark Malone]

everything you have configured and set in your config and the video output looks correct , try Google chrome or firefox , if that doesn't work I would try load another version of cpp to your flash as there could be an issue with the one loaded

[dmitriyarnov]

No browsers do not correct the problem, I put CCPE 2,4 it also did not help

[dmitriyarnov]

my configuration after a reset of the router

[dmitriyarnov]

моя конфигурация после сброса  роутера

my configuration after a reset of the router