08-28-2020 07:33 AM
i, i´m getting some error in my network catalyst 6800 and 6500 core switches.
i would like to know what´s does it mean ?
%EARL-SW2_DFC3-1-EXCESSIVE_PARITY_ERROR: EARL 0: Parity error detected in VRAM
%SYS-DFC4-2-CFORKMEM: Process creation of NTI Trigger Instance for EP ID 0x1 failed (no memory). -Process= "Cat6k NTI ICC process", ipl= 0, pid= 47
SW1: VSLP_PKT_HDR inband rx vslp_pkt_is_checksum_ok: hdr 0x5AB7A638 ver 0.000 type LMP(0) pdu_length 40(0x28) flags 0x0001 out 5/16 in 0/0 tlv 1 checksum 0x7498 seq# 0
Aug 28 03:10:01.687 CEST: SW1: VSLP_PKT_DATA inband rx vslp_pkt_is_checksum_ok: 0x5AB7A638 76(0x4C) bytes
08-28-2020 07:38 AM
This looks for me as BUG as of now based on the Log: ( check the show version - see are you running same IOS ?)
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCus64795/?rfs=iqvred
08-28-2020 07:50 AM
08-28-2020 07:43 PM
EARL messages are very to the Catalyst 6500/6800 family.
%EARL-SW2_DFC3-1-EXCESSIVE_PARITY_ERROR: EARL 0: Parity error detected in VRAM
Above means the line card on switch 2, slot 3 is having issues sending management traffic from the line card to the supervisor card. There are two ways to fix this:
08-30-2020 11:19 PM
thanks, but what about the other error:
%SYS-DFC4-2-CFORKMEM: Process creation of NTI Trigger Instance for EP ID 0x1 failed (no memory). -Process= "Cat6k NTI ICC process", ipl= 0, pid= 47
08-31-2020 01:06 AM
- Could be a software bug , which might be resolved in later and or subsequent software releases for your device.
M.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide