Cisco IOS error

[sarenos2006]

I have this error when I start my router

System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)

Copyright (c) 2003 by cisco Systems, Inc.

Bad RAM at location 0x00000000: wrote 0x00000000, read 0x00000400

Which is the problem? How can I fix it?

[ankbhasi]

Hi Friend,

Can you try to reseat the RAM module? The problem is likely being caused by a bad contact, I have seen this before.

Regards,

Ankur

[sarenos2006]

How can I reset the RAM? Is it necessary to remove the cover?

regards

[dan-jones]

You will have to open the chassis to access the memory.

You might check on the website of a memory vendor (I like Memoryx.com (http://www.memoryx.net/memory-cisco.html)) and see if they have a layout of the inside of the router (especially where the RAM is).

That will give you an idea of what you will be looking at when you open the chassis.

[sarenos2006]

Thank you very much I have replaced the RAM from other router and now is running correctly.

Regards