Cisco ISE 2.4 configuration on Cat 9200 series switch

[aslam.bajwa]

Hi All , 

i have cisco ISE 2.4 and NAD is Cat 9200 series switch . 

DHCP  is not working with windows end points , dotix is successful but Data domain is showing unauthorized , 

please advise , how i can fix this issue ..

Regards ,  

[aslam.bajwa]

authentication session report :
Interface: GigabitEthernet1/1/3
IIF-ID: 0x19C121B7
MAC Address: c434.6b54.311a
IPv6 Address: fe80::5d84:4efc:e529:5f
fe00::
IPv4 Address: 192.168.x.x
User-Name: ------------
Status: Unauthorized
Domain: DATA
Oper host mode: multi-domain
Oper control dir: both
Session timeout: N/A
Acct update timeout: 300s (local), Remaining: 72s
Common Session ID: 0BA5030A000000E9044418E3
Acct Session ID: 0x00000033
Handle: 0x61000050
Current Policy: POLICY_Gi1/0/3


Local Policies:
Service Template: DEFAULT_LINKSEC_POLICY_SHOULD_SECURE (priority 150)
Security Policy: Should Secure
Idle timeout: 65536 sec

Server Policies:
ACS ACL: xACSACLx-IP-EGY_ACL_WIRED_COMPLIANT-5ef4577d


Method status list: