11-12-2013 06:38 PM - edited 03-07-2019 04:34 PM
Hi,
I would like to confirm that can I configure vPC with 1 x 10G-SR and 1 x 10G-LR together for vPC peer link or vPC?
Cheers!
Solved! Go to Solution.
11-12-2013 07:15 PM
Hi,
Sure, they are both 10Gig links, it doesn't matter if one optic is LR and the other one is SR. It is not very common, but it works. SR optics and fiber patch cords are usually cheaper then LR.
HTH
11-12-2013 07:15 PM
Hi,
Sure, they are both 10Gig links, it doesn't matter if one optic is LR and the other one is SR. It is not very common, but it works. SR optics and fiber patch cords are usually cheaper then LR.
HTH
11-12-2013 07:17 PM
Hi Reza,
Thank for quick response. I was confused with M1 and F1 module.
Cheers
Zarni
11-15-2013 07:20 AM
I'm sorry, but that answer is just plain wrong. SR uses a wavelength of 850 nm on multi-mode fiber, while LR uses a wavelength of 1310 nm on single-mode fiber. Occasionally, you can make them talk, mostly because the receiver filters are so broad that they will see ialmost anything, but it will not be reliable.
07-26-2023 02:51 PM
What about fiber sfp and coper sfp :
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide