cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1396
Views
0
Helpful
4
Replies

Cisco Packet Tracer

jjeremias111
Level 1
Level 1

Hi, 

       I'm using the cisco packet and I'm trying to connect the Ip Phone but I couldn't get the IP to the IP Phone. I already configured the DHCP Server including the VLAN for the data and voice. Also, I can receive IP to computers. please hel

1 Accepted Solution

Accepted Solutions

Hello,

 

you had a lot of misconfigured (trunk) links on the switches, I also configured both DHCP pools on the router. Also, I shut down the link from the right switch to the router, as there was no IP addessing. And I assigned numbers to the phones, for the sake of completeness...

 

Find attached the working config.

View solution in original post

4 Replies 4

Jaderson Pessoa
VIP Alumni
VIP Alumni
could you post here your pkt?
Jaderson Pessoa
*** Rate All Helpful Responses ***

I try to set up the DHCP from the router but won't manage to receive the IP. 

Hello,

 

you had a lot of misconfigured (trunk) links on the switches, I also configured both DHCP pools on the router. Also, I shut down the link from the right switch to the router, as there was no IP addessing. And I assigned numbers to the phones, for the sake of completeness...

 

Find attached the working config.

Thank You, I also manager to have the DHCP server for the computer only.

 

Review Cisco Networking for a $25 gift card