Dear Cisco I have problem with my Router Cisco2621xm you can see below the configuration Current configuration : 1235 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hos
! no aaa new-model ip subnet-zero ip telnet source-interface FastEthernet0/1.1 ! ! ip dhcp excluded-address 172.16.1.1 172.16.1.10 ip dhcp excluded-address 172.16.2.1 172.16.2.10 ! ip dhcp pool 1 network 172.16.1.0 255.255.255.0 default-router 172.16.1.1 dns-server 8.8.8.8 ! ip dhcp pool 2 network 172.16.2.0 255.255.255.0 default-router 172.16.2.1 dns-server 8.8.8.8 ! no ftp-server write-enable ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! ! ! ! interface FastEthernet0/0 ip address 109.224.37.82 255.255.255.240 ip nat outside duplex auto speed auto ! interface FastEthernet0/1 no ip address duplex auto speed auto ! interface FastEthernet0/1.1 encapsulation dot1Q 100 ip address 172.16.1.1 255.255.255.0 ip nat inside ! interface FastEthernet0/1.2 bandwidth 4000 encapsulation dot1Q 200 ip address 172.16.2.1 255.255.255.0 ip nat inside ! interface FastEthernet0/1.3 description THIS NETWORK FOR OFFICE SYS encapsulation dot1Q 300 ip address 192.168.20.1 255.255.255.0 ! interface FastEthernet0/1.4 encapsulation dot1Q 400 ip address 192.168.50.1 255.255.255.0 ! ip nat inside source list NAT interface FastEthernet0/0 overload ip classless ip route 0.0.0.0 0.0.0.0 109.224.37.81 ip http server ! ip access-list standard NAT permit 172.16.1.0 0.0.0.255 permit 172.16.2.0 0.0.0.255 ! ! ! ! ! ! ! ! line con 0 password oilminister17 line aux 0 line vty 0 4 password oilminister17 login ! ! ! end
