Upgrading a NX 7K.A scp copy of SO image from a server to NX7K bootflash is very very slow.It took more than an hour to copy 30% of n7000-s1-dk9-npe.5.2.7.binDoes anybory have a sugestion ?Thanks Rosa
Upgrading a NX 7K.A scp copy of SO image from a server to NX7K bootflash is very very slow.It took more than an hour to copy 30% of n7000-s1-dk9-npe.5.2.7.binDoes anybory have a sugestion ?Thanks Rosa
I have one interface g1/0/3 is flapping, but i go to sh int g1/0/3 Last clearing of "show interface" counters 1y5w. does it mean the interface is up for 1 year 5 week? which filed shows the up time for the interface? we have received alert of stp to...
I need to configure port mirroring in both L2 and L3 switches. Purpose of mirroring is to monitor the utilization of existing check point Firewall which is connected in both switches through new Firewall. Below are the existing and proposed connectiv...
Hola. Tengo un switch sf200 -24p y el cooler del mismo no corta nunca. otros switch de otras marcas que tengo si cortan y solo funcionan cuando por la temperatura lo amerita. Es posible programar el mismo para que no funcione todo el tiempo ?
Hi all, We have a 3845 Router running an Adv-enterprise service image on our premises. I was thinking of installing a security license on it and upgrade the IOS ( if necessary ) . The purpose is to use is as temporary GRE router for my back up site ...
Dear Cisco I have problem with my Router Cisco2621xm you can see below the configuration Current configuration : 1235 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! ho...
Hi, I posted about this problem but didn't get the answer yet and will very appreciate if you can help me.. If I look at the mac address table, the ports says 'Router' (BOLD). Why doesn't it show port such as g1/0 or g0/12.. What does that mean?...
Hi, I recently started to look into FWSM. I heard that it's a module that acts ac Firewall. There why do we have both FWSM and ASA in our data center? Then what's the difference between FWSM and ASA? How can I check if there is a FWSM and if it is...
I can’t get my lab switch non-primary VLAN’s to be able to ping my lab router. Only switch VLAN 1 (default) is able to ping the router interface. I have a home lab with a Cisco SG300-10 switch and an EdgeRouter-X router, which is connected to the re...
I have a VTP domain of 8 switches(cisco 3560) with 400 VLANs, on one of the switch I am getting the following log message: %SPANTREE_VLAN_SW-2-MAX_INSTANCE: Platform limit of 128 STP instances exc I have assigned IP address to VLAN 11 and 12 on all...
I am having trouble configuring my ASA I can get to the internet from the Router but not from the ASA. What have I missed? Please help.
H All, We do have split MAC wireless design and we purchased APs that can only support Poe+ for full functionality so we had to purchase 12 switches 2960X which support both Poe or/and Poe+. One of busiest distribution Centre needed an early inject...
olks, How do I restrict access to the asr9k edge router and IOS XR because in the log show multiple attempts to access by ssh, telnet. I want to release only for internal network in port mgmt of ip 10.10.10.8/24. And I also want to block externaliz...
Hi guys,I'm rather new to this so I might be asking some silly questions.We have just bought two 24port 3850, and I'd love to get them work as a stack. I've plugged in the stackwise, configured VLAN's and Syslog. I boot the master then the slave and ...
Does the Catalyst 9300 support GRE tunnels?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-13-2024 07:22 AM | ||
07-10-2024 04:41 AM | ||
07-09-2024 08:16 AM | ||
07-05-2024 06:35 AM | ||
06-28-2024 01:20 PM |
User | Count |
---|---|
9 | |
8 | |
5 | |
5 | |
4 |