06-17-2013 02:08 PM - edited 03-07-2019 01:56 PM
I have a quick question. I was looking at the documentation for hardware support for our proposed IOS -
cat4500e-universalk9.SPA.03.04.00.SG.151-2.SG.bin using Sup 7L-E and our linecards. Please see below.
thanks
On this link, it didn't mention if it supports hardware for our Sup card
NAME: "Switch System", DESCR: "Cisco Systems, Inc. WS-C4506-E 6 slot switch "
PID: WS-C4506-E , VID: V03 , SN: FOX1607H0ND
Does anyone know if it's supported and if so, where to find the documentation?
thanks
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/release/note/OL_27991-01.html#wp2710117
NAME: "Switch System", DESCR: "Cisco Systems, Inc. WS-C4506-E 6 slot switch "
PID: WS-C4506-E , VID: V03 , SN:
NAME: "Linecard(slot 1)", DESCR: "Sup 7L-E 10GE (SFP+), 1000BaseX (SFP) with 4 SFP Ports"
PID: WS-X45-SUP7L-E , VID: V01 , SN:
NAME: "GigabitEthernet1/3", DESCR: "1000BaseSX"
PID: Unspecified , VID: , SN:
NAME: "GigabitEthernet1/4", DESCR: "1000BaseSX"
PID: Unspecified , VID: , SN:
NAME: "Linecard(slot 2)", DESCR: "10/100/1000BaseT (RJ45)+V E Series with 48 10/100/1000 baseT Premium PoE ports (Cisco/IEEE)"
PID: WS-X4648-RJ45V+E , VID: V07 , SN:
NAME: "Linecard(slot 3)", DESCR: "10/100/1000BaseT (RJ45)+V E Series with 48 10/100/1000 baseT Premium PoE ports (Cisco/IEEE)"
PID: WS-X4648-RJ45V+E , VID: V07 , SN:
NAME: "Linecard(slot 4)", DESCR: "10/100/1000BaseT (RJ45)+V E Series with 48 10/100/1000 baseT Premium PoE ports (Cisco/IEEE)"
PID: WS-X4648-RJ45V+E , VID: V06 , SN:
NAME: "Linecard(slot 5)", DESCR: "10/100/1000BaseT (RJ45)+V E Series with 48 10/100/1000 baseT Premium PoE ports (Cisco/IEEE)"
PID: WS-X4648-RJ45V+E , VID: V06 , SN:
NAME: "Fan", DESCR: "FanTray"
PID: WS-X4596-E , VID: V04 , SN:
NAME: "Power Supply 1", DESCR: "Power Supply ( AC 4200W )"
PID: PWR-C45-4200ACV , VID: V04 , SN: AZS16150C09
NAME: "Power Supply 2", DESCR: "Power Supply ( AC 4200W )"
PID: PWR-C45-4200ACV , VID: V04 , SN:
Solved! Go to Solution.
06-17-2013 02:24 PM
Hello Bedevere,
Yes, SUP7L-E is supported by the chassis WS-C4506-E. The supervisor must be inserted into SLOT 1 of the chassis. This chassis does not support supervisor redundancy. Please find the required document in the below link.
Thanks,
Arun
06-17-2013 02:24 PM
Hello Bedevere,
Yes, SUP7L-E is supported by the chassis WS-C4506-E. The supervisor must be inserted into SLOT 1 of the chassis. This chassis does not support supervisor redundancy. Please find the required document in the below link.
Thanks,
Arun
06-17-2013 02:33 PM
Thank you sir. Much appreciated.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide